We may earn a commission if you purchase a product through one of our links

Top 10 Best 4 pin molex to 4 pin pwm cpu fan Reviews

Top 10 Best 4 pin molex to 4 pin pwm cpu fan in 2021 Comparison Table

Bestseller No. 1
2 Pack 4-Pin Molex (Actual 2-Pin) to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power Cable
  • Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer
  • 4 Pin Molex (Actual 2-Pin) to 2 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable
  • Power two 3pin or 4pin (PWM Connector) PC case fan with a 4pin molex connector
  • High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin fans, Fans will be operated at the fixed Molex voltage of 12V
  • 2 Pack 4-Pin Molex to 2 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Cooler Cooling Fan Splitter Y Power (Molex-3Pin/4Pin Cable (Splitter))
Bestseller No. 2
Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 10 Splitter 10 Way Hub 4 Pin Molex Powered PC Case Internal Motherboard Fan Power Extension Cable Cord for ATX Computer Case 4-Pin and 3-Pin Cooling Fans
  • Excellent 1 to 10 splitter 10 way 4-pin PWM fan power supply extension hub, it provide a better power supply solution for atx PC computer case internal motherboard cooling fans & cpu fans.
  • Widely Compatible: support 4-pin and 3-pin pc case fans cable; this 1 to 10 splitter 10 way fan power extension hub compatible with 4-pin and 3-pin pc case fans.
  • Plug-n-Play, easy to use; 10 splitter 10 way 4 pin PWM pc case fan hub.
  • The 10 splitter 10 way extension hub offers greater flexibility between motherboard and cooling fans in the atx pc case.
  • Please be kindly noted that this 10 splitter pc case fan hub need to be connected with the 4-pin Molex power supply cable; And the PWM interface should be connected to CPU_FAN port on the motherboard with the dedicated cable in the package.
Bestseller No. 3
Chassis Fan Hub CPU Cooling 10 Port 12 V Molex to PWM Connector with 4 Pin 3 Pin Efficient PC-Fan Controller System with Adhesive Tape Dedicated Supply from PSU to Link Multiple Points
  • Manages multiple fans - If your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. The 12V fan controller accurately controls 4-pin fan speed from a single case input
  • Cooling when you need it - Quiet when you don't. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. The pwm fan hub then matches the power level for the other ports
  • Easy to install - Just plug the molex fan controller into the motherboard and connect to the PSU. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis
  • No frills, all function - Strong wire connections and clean sleeving are part of our simple, cost effective design. Take care during installation to avoid bending the pins and capacitor
  • Money back guarantee - All of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right. If you are unhappy for any reason, contact us for a full refund
Bestseller No. 4
2 Pack 4-Pin (Actual 2-Pin) Molex to 3 Pin 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Case Fan Power Adapter Cable
  • 4 Pin Molex to 3 pin 12V PC case fan power adapter cable, Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer
  • Use to connect any 3pin or 4pin (PWM Connector) fan to a 4pin molex connector
  • High density black sleeving cable, 10 inch length
  • Fans will be operated at the fixed Molex voltage of 12V
  • 2 Pack 4-Pin (Actual 2-Pin) Molex to 3 Pin 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to Molex Computer Case Fan Power Adapter Cable
Bestseller No. 5
ThreeBulls PWM Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way (15.7 Inch)
  • Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
  • Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
  • Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.
  • Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
  • Package contents: 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.
Bestseller No. 6
DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header
  • If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.
  • If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1 can be identified by the system.
  • Capable of connecting to 10 PC fans simultaneously for cooling the computer system.
  • Powered by a stable SATA connection to the system PSU for up to 10 fans.
  • Velcro and screw mountings applicable for the tower interiors.
Bestseller No. 7
4-Pin Molex to 4 x 3/4-Pin PC Case Fan Sleeved Adapter Cable
  • Power Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With A Molex Connector
  • Cable Is Compatible With Standard 3-Pin Fans As Well
  • Fans Will Be Operated At The Fixed Molex Voltage Of 12V (Only 2 Pins In Connector Required)
  • Quality High Density Black Sleeving For All Black Appearance;Total Cable Length (Excluding Connectors): 12"/30cm
  • ✔MONEY BACK PRODUCT WARRANTY✔ Our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. We will go an extra mile to redress the situation at hand.
Bestseller No. 8
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
  • Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
  • In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
  • For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
  • There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
  • RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
Bestseller No. 9
Molex to 3Pin/4Pin Fan Adapter, 12V PC Fan Adapter 4Pin Molex to 4 PWM Splitter Sleeved Braided Cable UIInosoo for 3 Pin or 4 Pin Computer PC Case Fan Power Supply 11inch
  • Connector 1 - 4 Pin Molex (This 4-Pin Molex is actual 2-Pin but it still works fine on your computer, because only 2-pin in connector required for fixed Molex operated voltage of 12V) ; Connector 2 - Four PC case fan PWM connectors.
  • Power four 3 pin or 4 pin PC case fans with a Molex connector.
  • High quality black sleeved cable, the braided thread has good durability and long service life.
  • Money saving, with one molex plug you can power up to 4 case fans-works and helped you organize your cords better. This minimized the number of Molex cables you needed to have inside your case. It adds fans for older motherboards at a nice price.
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best.
Bestseller No. 10
CRJ 4-Pin Molex to 4 x 3/4-Pin PC Case Fan Sleeved Adapter Cable
  • Power Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With A Molex Connector
  • Fans Will Be Operated At The Fixed Molex Voltage Of 12V (Only 2 Pins In Connector Required)
  • Cable Is Compatible With Standard 3-Pin Fans As Well
  • Quality High Density Black Sleeving For All Black Appearance
  • Total Cable Length (Excluding Connectors): 12"/30cm
Are you searching for top 10 rated 4 pin molex to 4 pin pwm cpu fan for the budget in 2021? After evaluating and analyzing in detail more than 32,168 customer satisfaction about top 10 best 4 pin molex to 4 pin pwm cpu fan in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable with Molex Power – 1 Foot


Our rating:4.8 out of 5 stars (4.8 / 5)





[ad_1]

Product Description

Custom Build Computer Cooler CableCustom Build Computer Cooler Cable

Custom Build Computer Cooling Cable

The Cable Matters PWM 3-Fan Splitter Cable with Molex Power provides a convenient solution for adding computer case ventilation with additional fans. Eliminate the need for a separate fan control by using the fan port on a motherboard equipped with PWM fan control.

Fan Power & Control in a Cost-Effective 2 Pack

Power and control 3 fans with a single PWM connection to the computer motherboard and an LP4 Molex connection for power. Regulate the speed of all 3 fans by with PWM controller software from the motherboard. Connect the 4-Pin fan connector to the main fan and the the 3-Pin plugs to the other slave fans so they can all operate at the same RPM. This cost-effective 2-Pack of cables

Important Notes

2-Pin or 3-Pin fans do not have speed control (check your pin locations for compatibility)Check the specifications of your PWM fan and motherboard for compatibility

Cable Specifications

CPU Fan Plug: 4-Pin MaleCase Fan Plugs: 2 x 3-Pin MaleMotherboard PWM Header: 4-pin FemaleMolex PSU: LP4 2-pin MaleMax Power Rating: 18WCable Length: 11.8 Inches

Molex Fan ConnectorsMolex Fan Connectors

PSU Molex Power

Plug directly into a spare Molex power cablePower your fans from a single motherboard headerCool your computer case without drawing power from your motherboard

Motherboard ConnectorMotherboard Connector

3x Fan Splitter3x Fan Splitter

Power & Cooling SolutionPower & Cooling Solution

Motherboard Connector

Connect 3 fans to a single Mobo plugPWM fan speed control must be supported by the motherboard to regulate the fan speed

3x Fan Splitter

4pin PWM case fan compatible will run at the same speed (slaved) as 4pin fan when supported by the motherboard

Power & Cooling Solution

Molex PSU Connector: LP4 2-Pin MaleMobo PWM Header: 4-Pin FemaleCase Fan Plugs: 2 x 3-Pin Male Main Fan Plug: 4- Pin Male

Sleeve Cable Jacket

Available Lengths

12 Inches

15 Inches

12 Inches

4 Inches

12 Inches

Multipack Sizes

2-Pack

2-Pack

2-Pack

2-Pack

2-Pack

Model No

104034

104054

104053

104040

104048

PC fan splitter cable connects 3 computer PWM fans with Pulse Width Modulation speed control to a single power supply; Practical case fan splitter cable eliminates the need for a separate fan controller; Molex PSU fan connection provides power and a PWM motherboard connection provides fan speed regulation
Molex power lp4 power connection provides supplemental power to the fans instead of relying on the motherboard; The PWM splitter cable is a practical solution for a motherboard with a single PWM fan port
MOBO 4-pin receptacle connects to the 4-pin header on the motherboard and splits the signal to 3 PWM fans; Fans can spin at the same speed using software from a motherboard equipped with PWM control; Install a gaming rig with extra fans to operate quietly and kick in for cooling when overclocking
The computer fan splitter cable connect to a CPU fan splitter to 2 case fans; 4-pin fan plug has a green wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans; 3 pin fan splitter connectors omit the RPM signal pin and slave to main fan; Cost-effective 2-pack fan header splitter provides or spare or replacement cable
4 pin fan splitter is compatible with popular brands of computer case cooling fans including ARCTIC F8 PWM Rev. 2 Fluid Dynamic Bearing / F12 120mm, Corsair Air Series AF120 / Series SP120 Twin Pack, CM Sleeve Bearing 120mm / CM Silencio FP120 PWM 2400 / Blade Master 92 / Blade Master 120 Hyper 212 EVO 120 / JetFlo 120

About Paul S. Brunet

Known as the "Tech Lover", Paul is an expert of current and trending technology. Here at TinyGrab, he makes "tech" easy to understand for the average person.

Leave a Comment