Top 10 Rated artic fan graphic card in 2021 Comparison Table
- NVIDIA Ampere architecture, 2nd Gen Ray Tracing Cores, 3rd Gen Tensor Cores
- 12GB 192-bit GDDR6, 15 Gbps, PCIE 4.0; Boost Clock 1807 MHz
- IceStorm 2.0 Cooling, Active Fan Control, Freeze Fan Stop, Metal Backplate
- 8K Ready, 4 Display Ready, HDCP 2.3, VR Ready
- 3 x DisplayPort 1.4a, 1 x HDMI 2.1, DirectX 12 Ultimate, Vulkan RT API, OpenGL 4.6
- ❤UNIVERSAL GPU COOLER: PCI slot fan gpu cooler3 x 92mm mining rig fans xfx gpu cooler with total size 278x125x30mm (10.94x4.92x1.18inch) designed for most universal graphic card video card VGA cooling mining rig frame ,just please check the size to make sure your pc has enough space.
- ❤5V 7V 12V VOLTAGE: 1x Power D-type interface cable ,four interface with 5V 7V 12V voltage sticker,choose different voltage to get airflow: 56CFM ,84CFM ,140CFM and different noise level.
- ❤FAN SPLITTER CABLE:1x 4Pin fan splitter cable,you can combine 3x92mm fans into one interface to be connected with voltage cable.ignore it,Each fan can be worked independently,easy operation and replacement.
- ❤PACKAGE INCLUDED: 3x92mm fans(PCI bracket screwed), 1x multi-voltage cable ,1x fan splitter cable.
- ❤100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose.
- Totally Size: 276mm(L) x 120mm(W) x 30mm(H) / 10.86in(L) x 4.72in(W) x 1.18in(H); Packing: 3x90mm graphics card fan with 1*Power D-type Interface cable; please check the size to make sure your pc has enough space.Designed for most universal graphic card video card VGA computer PC Case cooling;
- Rated Voltage:12V 0.2 A; Speed: 1800RPM x 3 ; Air flow: 40 CFM x 3 ; Noise:37dBA
- Universal GPU Cooler, Fit for most of the market graphic card video card VGA computer PC Case cooling.
- D-type interface cable included four interfaces, three voltages: 5V 7V and 12V; Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan.
- Warranty: One-year quality assurance. Please contact us If the product has any quality problems, it will be refunded within 90 days and replaced within one year.
- Important: Only For MSI gaming GPU, Like GTX1070/1080 Ti Gaming Video Card
- Important: Please check the photos carefully, make sure the fan can work for your video card before order. If you do not make sure, please contact us to confirm, thank you
- Suitable for MSI GTX 1060/1070/1080 Ti Gaming X Graphic Card
- Suitable for MSI RX 570/580 Gaming X Video Card
- Please keep the screw from your fan , we sell the fan not include any screw
- EXTREMELY high thermal conductivity of 12.5KW achieved with even smaller particles, is perfect for even the most demanding configurations and can also be used in industrial cooling systems
- THERMAL COMPOUND PASTE EASY TO USE - Thanks to a specially constructed syringe and a spatula for spreading thermal grease included. It guarantees a simple, pleasant and precise distribution of the paste on your processor or graphics card
- LONG ACTION - Provides long-lasting effect, thanks to its characteristic and specialized structure, Kryonaut thermal paste does not dry out even at 80° Celsius degrees
- SURPRISING EFFECTS - Already at the first use of this thermal solution, you may experience a drop in temperature, which will reduce the loudness of your equipment and improve the comfort of use
- NUMBER 1 ON THE MARKET - Confirmed by many tests, the most popular choice meets the highest quality standards not only of standard computer users but also of avid Overclocking fans
- Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance.
- Cools your CPU and GPU: install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures.
- Improved CPU cooling: ultra-low thermal impedance lowers CPU temperatures vs common thermal paste.
- Installation Made easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler.
- Filling the gap: xtm50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer.
- PERFORMANCE KING: With a more efficient cold plate, proprietary pump and fans optimized for static pressure, the Liquid Freezer II series clearly sets itself apart from other AiO water coolers
- ELEGANT ILLUMINATION: 24 digital A-RGB LEDs placed along the fan hubs plus the transparent rotor, with its closed design, provide even and rich illumination
- INTEGRATED CABLE MANAGEMENT: The PWM and A-RGB cables of the radiator fans are integrated into the sheathing of the hoses, reducing visible cables to a minimum
- 80% LESS POWER CONSUMPTION: Unlike the competition, our PWM-controlled pump consumes less power and produces less noise when little cooling power is required
- MAINTENANCE-FREE WATER LOOP: The water circuit is sealed and fitted with fiber-reinforced EPDM tubing, preventing evaporation of the coolant = no refilling required
- OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure
- 200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
- MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors
- EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
- TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin
- Shims are used between the CPU/GPU and heatsinks to provide better cooling for your PS3
- Shims are 42MM X 42MM and are 1.2MM thick
- 100% copper, cut and polished
- Contents = 2 shims + 2 syringes of thermal paste, 15ml Kester 951 flux and T8/T10 torx screwdrivers
- Personal Air Cooler: Enjoy cool air anywhere with this air cooler that helps turn hot, dry air into cold, refreshing air
- Quiet and Lightweight: The whisper quiet fan plus soothing night light make this air cooler perfect to use overnight for a comfortable sleep
- Efficient Cooling: Hydro Chill Technology pulls in hot air through an evaporative air cooling filter and turns it into cool, refreshing air instantly; The multi directional air vent is adjustable to point the air to the area you want
- Easy to Use: It's simple to set up and use, just pour water in the top fill tank, plug it in, and enjoy
- Cool Air Wherever You Need It: The sleek, compact design fits nicely on your desk, nightstand, or coffee table wherever you need it; Use it in your home or work office, garage, RV camper, dorm room; It’s even convenient for travel
Our Best Choice: Maxmoral 1-Pack 3 Slots Fan Mount Rack PCI Slot Bracket for Video Card DIY Support 8cm 9cm Fan Computer Radiator Holder
[ad_1] Form: PCI Slot Admirer Mount Bracket
Designed of high quality steel content with good workmanship, black stoving varnish surface, beautiful visual appeal, rust and corrosion resistance, strong to use.
Supply with 1 PCI slot brace and 4 lover connectors, utilized to mount 3 Computer system cooling lover in a person PCI slot bracket.
Successfully improve the procedure heat dissipation result, cut down Computer case sound, for much more potent effectiveness.
Match for 8cm, 9cm fan, good compatibility with most of graphics cards. Sensible lover add-ons for computer system project Do-it-yourself.
Straightforward layout, quick procedure, appear with matched repairing screw fasteners, practical to install.
The supporter thickness is 25mm. Other thickness fans are not applicable.
Acquire up 2 PCI slot room.
1pcs PCI Slot Bracket
4pcs Enthusiast Holder
1 Established Correcting Screws
Kind: 1 Set PCI Slot Supporter Mount Bracket, Straightforward structure, simple procedure, arrive with matched repairing screw fasteners, convenient to set up.
Built of large high quality metallic substance with high-quality workmanship, black stoving varnish floor, wonderful visual appearance, rust and corrosion resistance, resilient to use.
Provide with 1 PCI slot brace and 4 supporter connectors, applied to mount three Computer cooling admirer in a single PCI slot bracket.
Correctly boost the procedure warmth dissipation outcome, lower Laptop circumstance sound, for a lot more highly effective efficiency.
Suit for 8cm, 9cm admirer, excellent compatibility with most of graphics cards. Functional fan add-ons for pc undertaking Do it yourself.