Contents
Top 10 Rated car mount for iphone 6s plus in 2022 Comparison Table
- Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
- 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
- Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
- Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
- This car phone mount holder is compatible with most all cell phone devices
- Secure Stable Install: The VICSEED phone car holder with the latest improved vent clip [ Won't broken & Drop off ]. The car phone mount attaches easily and securely to most of air vent. After take few seconds to install it well, if you hit a bump or a sharper turn the car phone holder will stay in a place. It ensures a safe, distraction-free car environment
- Perfect Protection: Say goodbye to the easy-scratched plastic panel phone mount. VICSEED cell phone holder for car adds a upgrade high-density silicone material with excellent resilience. The car mount for phone is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices
- Easy to Adjust & Multiple Viewing Angle: This car mount for phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. The phone car mount allows quick switching between vertically and landscape view .Position your phone at the perfect angle to enjoy a more relaxed and safer drive
- Secure Grip & One-button release: This car cell phone holder owns the thick arms built-in anti-slip rubber pads, which makes the iphone car mount can secure grip your mobile phone. No need worry your phone will fall off from the samsung universal car mount. It ensures a safe, distraction-free car environment. The hands free cell phone holder for cars also features a One-button release system that enables you only take 0.1S to lock or release your phone with one hand operation
- Friendly Design: VICSEED upgrade phone stand for car owns adjustable foot, the function not only has avoid some cell phone power or volume button will be squeezed by the clamp arm but also make the iphone holder can fit well for big phones.Fit well for all mobile phones between 4''-7''in width and most thick case
- Quick Release Button - Simply press the button on the back of the device and the extendable arms will slide out. Then, place smartphone inside and clamp arms back inwards to secure your smartphone. It's that simple!
- 360 Degree Rotation - Complete 360-degree rotation provides any type of viewing angle. Whether listening to a music playlist vertically, or watching your GPS horizontally, get the safest hands-free user experience with a full 360-degree angle.
- 2 Level Locking - 2 unique levels to lock your device to your car air vent blades. Level I is used for thicker blades while Level II is used for thinner air vent blades. With two different level locks, ensure your car mount and smartphone stay safe and secure.
- Universally Compatible - Nearly any smartphone will work with the XDesign car mount. The broad compatibility across multiple devices allows for nearly all users to enjoy a snug fit and safe ride with their smartphone.
- Note: Do not work with any circular air vent. Simplistic Installation, Single-handed operation and no tool is needed for installation.
- â Super Compatibility: This car mount universally fits mobile phone from 3" to 7", like iphone Xs, Xs Max, XR, iphone X, 8 Plus, 8, 7 Plus, 7, 6S Plus, 6S, 6 Plus, 5S, SE, Galaxy Note 8, S8 Plus, S8, S7 Edge, LG K20 V, GPS device like Garmin etc.
- â STABILITY: Triple reinforcement on dashboard, large silica gel base, plus a circle of adhesive silicone film and a suction cup, make the phone holder grip firmly on your car.
- â SECURITY: Car holder made of high quality spring, as well as two ends of clamping go with non-skip silicone, make it hold the phone securely and wonât slide or fly out even taking a sharp turn, sudden stop or accelerate.
- â MOBILITY: Sticky silicone material is not permanent attachment to the dash. It can be taken off from the dash easily, and the silicone bottom become sticky as new after flush.
- â Perfect Driving View: Thanks to its mobility, you can put the cell phone car holder at best position for your view. Two different angels provide more choices for you to find non light reflect and clear screen view.
- SUPER STRONG MAGNETS:No more worry about your phone keep falling off from your car mount, With 4 super strong magnets hold, Nekteck Air vent car mount will safely hold your phone unlike any other mounts out there.
- STURDY BASE: The high quality rubber construction of the base of this mount is unique and very functional as well. It guarantees that the base of the mount will solidly hold the magnetic head of the mount, in order to keep your devices in place, regardless of road vibrations or impacts.
- ROTARY DISPLAY: Rotate the mount or swivel your display as you please, it ensures optimal positioning angle,you can place your phone in horizontal or vertical,enjoying the optimal mounting display experience.
- RUBBER AND STYLISH SURFACE DESIGN: The high quality rubber construction will not do any harm to your car or device,and you will love its fashion and beautiful design.
- EASY TO INSTALL AND REMOVE: This mount is so easy to install, Universal fits for cell phones, mini tablets and etc. Just put the mount holder into the car air vent,and with the metal plate in the back of the phone,GPS or case.
- Worry Free Driving - The Durahold Series with a re-designed extendable car mount securely holds your smartphone to your dashboard or windshield providing you with a hands-free driving experience! Featuring extendable arms to accommodate smartphones of all sizes and an anti-slip pad to completely hold your device in place. (Compatible with most smartphone, including iPhone 12/11 Pro Max, XR, XS Max, 8+, X, 8 7, Galaxy S20, S20+,10, S10+, S10e,S9 S8 S7, Note 20 10, LG, Pixel, HTC and more.
- Easy To Install - No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing. (Note: It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold).
- Versatile Angles - Featuring a ball swivel for 360-degree rotation, jointed arm for easy movement and an extendable neck for extended viewing. Rotate your smartphone in any orientation (horizontal or vertical) and at any angles, giving you the most comfortable and perfect viewing experience.
- Powerful Suction - Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold.
- Maxboost Durahold Car Mount is compatible with most smartphone, including iPhone 12/11 Pro Max, XR, XS Max, 8+, X, 8 7, Galaxy S20, S20+,10, S10+, S10e,S9 S8 S7, Note 20 10, LG, Pixel, HTC and more.
- ăTenet of TORRAS DesignăSimple but Unique! THREE mounting methods applied in ONE cell phone holder, which means you can mount it on your car dash, windshield or air vent
- ăTargeted Device is â+ăFully considered the compatibility, the phone car holder fits all mainstream smartphones like iPhone, SAMSUNG, Google Pixel, not over yet, it works for most vehicles like Sedan, SUV, Off-road and Truck
- ăWorry-free PPP PrincipleăPREMIUM silicone air cushions applied on this cell car mount all around PROVIDE the best PROTECTION for your expensive cell phone, no scratches
- ăSturdyâSturdierâSturdiestăAdopted the latest 17 shaping process and the Military-grade Sturdiness Test on the CAR PHONE HOLDER, 50X stronger than the normal ones
- ăThree Ones = Easy OperationăOne Button & One Hand & One Second make Easy Operation happen to this CAR PHONE MOUNT and save you 365ÂČ seconds a year
- ăGood CompatibilityăThis car phone holder fits 4.7-6.5 inches smartphones, like iPhone 13 12 Mini 11 Pro XS Max XS XR X 8 Plus 8 7 Plus 7 6S Plus 6S 6 SE, Galaxy S10e S10+ S10 S9+ S9 S8+ S8 Note 9 8, LG, Moto, Google Pixel, Moto.
- ăUnique Two Grips DesignăThis vent phone mount has two vent clips on the back, which ensures that it will not suddenly come loose while driving. More tightly than only one grip type.
- ăSecure & Easy to UseăThe retractable phone clamp will hold the phone securely and prevents it from falling off while driving, even on bumpy roads. Easy to insert and remove your phone with one hand.
- ăNo ScratchesăThe phone car clip is padded with rubber cushions that protect your phone as well as the air vent from scratches.
- ăBest Car Travel Companionă Great for long trips if using GPS. You can easily carry this pocket-sized car cradle around. The adjustable angles allow you to set your phone vertically or horizontally.
- ăSuper Sticky Gel PadăAttach to windshield, dashboard or most smooth flat surfaces. They will not fall off even in turns, bumps or when the speed too fast. The car mount can be restored to its mint condition by rinsing it with warm water and allowing it to air dry.
- ăHow to Use the SuctionăKeep clean where you install the phone mount. Open the lock lever before using, press the base until there is no air gap between the base and the suction,then lock the button, rather than stick directly to the dashboard or windshield.(Note: try to avoid direct exposure to the sun.)
- ăTelescopic Armă Adjustable telescopic arm accommodates desired length up to 6.3 inches, you can adjust the distance as your wish.
- ă360°Rotations & Adjustable HeightăSwivel ball head allows 360°free rotations to your desired viewing angle. The adjustable Fixed switch helps you adjust the car mount to the perfect height.
- ăWarningăDue to the flexible nature of the gel, some discoloration or residue may be left depending on the type of surface that it is mounted on. Please note, most likely will not work on leather/ vinyl dashboards.
- â[Easy & Quick Installation]: New Cup holder phone mount is adjustable and fits firmly and perfectly, securely in the cup holder for car, truck, SUV, golf cart, treadmill or stroller, fitting to varying size cup holders in your vehicle. Featuring one-button release side arms and convenient holder legs. For those who have a car, this is worth having. It is the most reassuring choice to give this as a holiday day christmas gift to someone you care about.
- â[Strong, stable & Durable]: Made with an adjustable heavy base and durable plastic, the phone holder will securely lock in your cup holder. The curved arm and 2 holding feet provide all-around protection for your phone and protect the devices from damage; It can hold your phone without concern for your phone moving as you drive. The holder has soft holder grips/backing will not scratch your device.
- â[Best rotational & Safe]: Enjoy a safe and the best viewing angle without obstructing your view, 360° rotatable for desired position vertical or horizontal mode on our cup holder cell phone holder. It can ensure safe driving whether you are talking, navigating, listening to music or charging.
- â[Broad Compatibility]: Suitable for all types of 2.01' - 3.54' wide devices, such as iPhone 13 Pro Max/12 mini/XS/XR/SE 2/8/7 Plus/6s, Samsung Galaxy S21/S10+/S9 Plus/S8/S7 Edge/Note20, Huawei, One Plus, HTC, LG, MOTO, GPS, PSP, Google Pixel, Nexus, Nikia, Oppo, Palm, Realme, Sony, Vivo, Xiaomi, Honor, Asus, Lenovo, Motorola, etc.
- â[NOTE]: Phone holder cannot fit the phone with battery case, support maximum 0.51" thickness device,The maximum size of the Phone cradle-holders base is the diameter 4â, Please carefully compare the size of the car cup holder and the product before purchase to ensure that this product can be placed in the car cup holder.
Our Best Choice: TORRAS Cell Phone Holder for Car [Thick Case & Heavy Phone Friendly] 3 in 1 Car Phone Holder Mount Dashboard Air Vent Windshield Compatible with iPhone 12 11 Pro Max Samsung Galaxy Note S21 Ultra

Product Description
Hello friend,
Do you always get annoyed with your cell phone holder falling off from your car dash/window or popping out of your car air vent while youâre driving?Are you confused why you canât have an unique car phone mount holding your phone firmly?Have you been looking for an ideal car phone holder suitable for your phone and vehicle, durable, beautiful, and safe?
Don’t WorryïŒ
TORRAS LATEST 3 IN 1 CAR PHONE HOLDER MOUNT with suction cup and air vent clip, 3 mounting options for you, DASHBOARD, WINDSHIELD and AIR VENT will be the one youâve been looking for!
Fragile Clips Clamping Your Vents Weekly?
Don’t worryïŒ
Embedded Clip + Up-down Bayonet + Open & Close by Rotating = Super StableïŒ
Trembling on Your Dashboard or Windshield?
Don’t worryïŒ
Ultra Sticky Pad – Providing a larger force area and smooth surface, giving your phone double protectionïŒ3 High-quality Adhesives – Rather than the 1 layer adhesive, triple stickiness, triple protectionïŒTemperature-resistant – Resisting up from -4°F(-20 ° c) to 203 °F(95 ° c)!
What’s More?
Reusable! – Washing the suction cup with warm water if the surfaces are dirty or you want to move it in a new place, then letting it air dry. The suction is as strong as before!
Short Arms canât Hug your Phone Tightly?
Don’t worryïŒ
Based on a year-long test, TORRAS found the most suitable wrapping angle for the car mount. The designed arm is more wrapping than the normal mounts.Depth of the phone holder clamp arms is 0.8â. The car mount can hold thick phone with wallet case, ring case and most phone accessories.This car phone mount fits most phones from 4â to 7â.
Compatible withïŒ iPhone 12 / 12 Pro Max / 12 Mini / 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4Compatible withïŒSamsung Galaxy S21/S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50sCompatible withïŒLG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQCompatible withïŒGoogle Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / PixelCompatible withïŒNexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones
Simple But Unique
You donât need to hesitate how to choose the car phone mount any longer. Choose this one, you are free to install it on the dashboard, windshield or the air vent. There must be a suitable installation method for you.Unique Streamlined inward shrinking clamp, hug your phone tightly, never fall off. It’s like a pair of arms holding your phone tightly. Super secure for your phone.Latest internal gear structure! On the one hand, the open process will be smoother. On the other hand, the accuracy of gear engagement is higher. That means it will greatly reduce the possibility of gear work errors and extend the service life of the gears. Tests show that its average service life is more than twice of other one button open car mounts.Fit for more cars, more phones, more phone cases. The true universal car phone mount.
Best for you!
[Strong Muscular Arms] Based on a year-long test, we found the most suitable wrapping angle for the car mount. The designed arm is more wrapping than the normal mounts. It hugs the “child” tightly like a father’s thick arm. Such a strong arms is a perfect choice most of the phones, especially for the heavy duty phones, such as iPhone 12 pro max / iPhone 11 pro max / Samsung Galaxy Note S21 Ultra.[Skidproof! Scratch-proof!] Torras never ignores every detail, even the small silicone pads, which have been rigorously tested. For most of the silicone pads on the market, we use the latest vacuum nanotechnology, which can adjust the shape of the silicone according to the size of the phone, ensuring that there is no gap between the phone car holder and the phone! So you neednât to worry about your phone suddenly falling off during the journey!
[3 In 1 Multi-function] With the latest powerful suction cup and air vent clip, this car phone mount could be installed on car dashboard, windshield or air vent securely. Even on the off road, it won’t stop working; Great choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
[Military Grade PP Material] Say goodbye to the easy-scratched plastic panel car mount .Adopt top quality PC and bite structure, passed the latest 17 shaping process. High quality and perfect appearance! It’s not only a car holder in your car, but also a great decoration!
[Super Secure Car Phone Holder] Unique streamlined inward shrinking clamp, hug your phone tightly, never fall off; Press the lock mechanism of the suction cup, it will make the car phone mount tightly locked on the dashboard; With the extra sticky pad, it helps create a smooth surface when the dashboard is not flat; Triangle air vent clip, as solid as a rock, you can rotate the wrench to tighten it according to the thickness of the vent; The supporting pieces will lock it from fall down.