Top 10 Rated cpu cooling fan controller in 2021 Comparison Table
- Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
- In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
- For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
- There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
- Mini size, suitable for more types of computer chassis
- Made of high-quality material, durable, firm and stable
- This cooling fan hub is equipped with the independent speed controller
- Professional high speed regulating circuit, high performance, support for SATA interface
- Cooling Fan Speed Controller only, other accessories demo in the picture is not included
- 【Knob Adjust】High accuracy and good performance, equipped with an independent speed controller and the speed can be adjusted at will.Adjustment Method: 1 Manual Adjustment Knob.
- 【Function】PC 8 Channels Fan Hub Reduce speed to reduce noise & power consumption when computer parts are free. Increase speed to reduce computer part temperature when computer parts are busy.
- 【Material】 Knob Cooling Fan Speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat.
- 【Universal】Widely used for PC computer water cooling system, easy to install.Fan Interface: 4PIN (3PIN Can be connected).Power Supply Interface: 4Pin interface.
- 【Save space】SinLoon PC 8 Channels Fan Hub The governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space.
- 【3Pin/4Pin Fan Hub】If your motherboard lacks fan interfaces, fan hub is the neat and tidy way to expand. Support 3Pin/4Pin dual-type standard fan port.Types: 1(3 Way With Cable), 2(3 Way With Black Cable), 3(8 Way 1 Knob 4D), 4(8 Way 1 Knob SATA), 5(8 Way 4 Knob 4D), 6(8 Way 4 Knob SATA).
- 【Knob Adjust】High accuracy and good performance, equipped with an independent speed controller and the speed can be adjusted at will.Adjustment Method: 1 Manual Adjustment Knob.Power Supply Interface: 4D
- 【Multiple Type】3/8-fan stepless variable speed upgrade, 1/4-Knobs control speed regulation, power supply interface supports 4D/SATA, 6 types for your choice.Installation Position: PCI Position of PC Chassis
- 【Universal】Widely used for PC computer water cooling system, easy to install.Fan Interface: 4PIN (3PIN Can be connected).Power Supply Interface: 4D/SATA
- 【Material】This Speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat.3 Way Cable Length: About 45cm/17.7inch
- ✔MOST EFFICIENT SATA TO FAN ADAPTER IN 2019✔ Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat & tidy way to add fans & expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down & speed up the fans up to the maximum speed. You need to connect the SATA & the 4 pin at the same time to run multiple fans.
- ✔PWM FAN CONTROLLER TEMPERATURE CONTROL✔ The CPU Port (red port), would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.
- ✔INSTALLATION & CONFIGURATION✔ Simple installation & easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection & then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- ✔STEP BY STEP SET-UP✔ You will receive 1 hub & 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hub’s PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis.
- ✔MONEY BACK PRODUCT WARRANTY✔ Our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. We will go an extra mile to redress the situation at hand.
- This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).
- This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.
- The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.
- The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop.
- The PWM ARGB hub is equipped with two connecting cables. Both length of the wires is 53 cm. The red port on the hub is a professional port for the CPU fan. Gold-plated pins, solid materials, strong and durable.
- Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
- Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
- Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.
- Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
- Package contents: 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.
- Compact, highly flexible controller for 4-pin PWM fans
- Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series
- “No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors
- Includes a 3-way splitter cable for controlling up to 3 fans simultaneously
- 6-year manufacturer’s warranty
- Supports all internal 12V 5A fans, synchronous rectified output, high efficiency, no need for additional heat sinks even for high current operation.
- Multiple fans can be used in parallel (total current does not exceed 5A), support automatic temperature control and air cooling speed control, temperature control speed has four temperature zone settings, widely used.
- It can be turned on with the three-wire fan monitoring function (stall warning).
- Circuit load capacity: 5A for each output and 8A for bus current.
- Output range: 20%-100% for the first channel, or 40%-100% for the first channel (TFL = ON), 10%-100% for the second channel and the third channel. (Note: The above range is only applicable to the PWM range, the actual control effect will vary depending on the fan)
- The fan controller accurately controls 4-pin fan speed from a single case input.
- Nice for PC computer water cooling system. Support PWM function fan automatic speed regulation.
- IDE Molex 1 to 10 way cooling fan splitter hub.
- Quiet when you don't. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps.
- Type: SATA Fan Hub CPU Cooling Connector.
Our Best Choice: EKDJKK 12V Chassis Fan Hub CPU Cooling, Cooling Fan Hub, Computer CPU Cooling Fans, Adapter Chassis Fan and CPU Fan Hub PC Fan Controller, 3 Pin 4 Pin to 8 Pin CPU Power Adapter
3Pin/4Pin Lover Hub: If your motherboard lacks supporter interfaces, fan hub is the neat and tidy way to increase. Assist 3Pin/4Pin dual-kind standard admirer port.
Knob Alter: Higher precision and fantastic overall performance, outfitted with an unbiased velocity controller and the speed can be adjusted at will.
Several Kind: 3/8-lover stepless variable pace update, 1/4-Knobs handle velocity regulation, power provide interface supports 4D/SATA, 6 sorts for your selection.
Common: Greatly utilized for Computer personal computer drinking water cooling method, easy to set up.
Materials: This Pace Controller adopts plastic and metal resources, tough, trustworthy, with reduced loss and very low heat.
Material: Plastic, Metal
3 Way Cable Length: About 45cm/17.7inch
Sorts: 1(3 Way With Cable), 2(3 Way With Black Cable), 3(8 Way 1 Knob 4D), 4(8 Way 1 Knob SATA), 5(8 Way 4 Knob 4D), 6(8 Way 4 Knob SATA)
Connectable Fans: 3
Adjustment Strategy: 1 Manual Adjustment Knob
Ability Supply Interface: 4D
Set up Posture: PCI Situation of Pc Chassis
Supporter Interface: 4PIN (3PIN Can be related)
Connectable Followers: 8
Adjustment Process: 1/4 Handbook Adjustment Knob
Power Source Interface: 4D/SATA
Set up Position: PCI Position of Laptop Chassis
Admirer Interface: 4PIN (3PIN Can be linked)
1computer x Cooling Fan Hub
【3Pin/4Pin Admirer Hub】If your motherboard lacks fan interfaces, lover hub is the neat and tidy way to broaden. Aid 3Pin/4Pin dual-sort normal admirer port.Styles: 1(3 Way With Cable), 2(3 Way With Black Cable), 3(8 Way 1 Knob 4D), 4(8 Way 1 Knob SATA), 5(8 Way 4 Knob 4D), 6(8 Way 4 Knob SATA)
【Knob Adjust】High precision and superior performance, equipped with an independent velocity controller and the velocity can be modified at will.Adjustment Approach: 1 Handbook Adjustment Knob.Electrical power Supply Interface: 4D
【Multiple Type】3/8-supporter stepless variable pace up grade, 1/4-Knobs control pace regulation, electric power source interface supports 4D/SATA, 6 varieties for your preference.Installation Situation: PCI Position of Personal computer Chassis
【Universal】Widely applied for Pc personal computer water cooling procedure, straightforward to set up.Lover Interface: 4PIN (3PIN Can be related).Electrical power Source Interface: 4D/SATA
【Material】This Velocity Controller adopts plastic and steel supplies, durable, trustworthy, with small loss and reduced heat.3 Way Cable Duration: About 45cm/17.7inch