Top 10 Best molex to 4 pin cpu in 2022 Comparison Table
Bestseller No. 1 
Monoprice Power Supply Adaptor - P4 to ATX, 4.8 x 4.6 x 0.8 inches
- Internal Computer power supply adapter to convert 4 pin Molex connectors to 4 pin connector needed to power P4 CPU on motherboard
- Monoprice continually strives to improve its product line to bring our customers the best products available
- Therefore changes may be made to listed specifications without prior notice
- Item received may not match photo or specs shown
- Connector Type: Cable
Bestseller No. 2 
(3-Pack) COMeap LP4 Molex Male to ATX 4 pin Male Auxiliary Power Adapter Cable 9.5-inch(24cm)
- ăMolex - ATX 4Pă4 Pin molex port to plug into the ATX Power Supply, ATX 4 Pin port to plug into the motherboard;
- ăSolutionăOffering best solution to convert the old-type power supply's molex connector to ATX 4 pin male;
- ăCompatibilityăCompatible with power supplies with molex port output & motherboards with ATX 4 pin port;
- ăParameterăLength(including connectors): 9.5-inch(24cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire), Rated power: 200W, Quantity: 3pcs, Self-adhesive tape*1pcs;
- ăNoteăThis cable was only designed for motherboard, not GPU(Graphics Card). It will be damaged and burned once you plug it into GPU and we wonât take any responsibility for wrongly using or installing. Please check the compatible types or contact us if you are not sure about it;
Bestseller No. 3 
TeamProfitcom Molex LP4 Male ATX Power Supply to CPU 8(4+4) Pin EPS-12V Converter Adapter Cable Braided Sleeved 20 inches (NOT PCIe Adapter Cable)
- Connector 1 : 4 Pin (actual 3 pin) molex ( connects to ATX Power Supply)
- Connector 2 : CPU 8(4+4) Pin (connects to motherboard)
- Allowing you to convert molex 4 pin male to EPS-12V 8 pin(4+4) male.
- Material: UL 1007-18AWG , Length:20 inches
- ATTENTION PLEASE :This adapter is only designed for motherboard, does not work with graphics cards
Bestseller No. 4 
COMeap LP4 Molex Male to CPU 8 Pin (4+4) EPS-12V Power Adapter Converter Sleeved Cable 13-inch(33cm)
- ăMolex - CPU 8P(4+4)ă4 Pin molex port to plug into the ATX Power Supply, CPU 8 Pin(4+4) port to plug into the motherboard (Note: The CPU 8 pin (4+4) end could not be split into 4 pin to use.);
- ăSolutionăOffering best solution to convert the old-type power supply's molex connector to EPS-12V CPU 8 pin male;
- ăCompatibilityăCompatible with power supplies with molex port output & motherboards with ATX 8 pin port;
- ăParameterăLength(including connectors): 13-inch(33cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire) with braided sleeves for easy cable management, Quantity: 1pcs, Self-adhesive tape*1pcs;
- ăNoteăThis cable was only designed for motherboard, not GPU(Graphics Cards). It will be damaged and burned once you plug it into GPU and we wonât take any responsibility for wrongly using or installing. Please check the compatible types or contact us if you are not sure about it;
Bestseller No. 5 
CRJ 4-Pin Molex to 4 x 3/4-Pin PC Case Fan Sleeved Adapter Cable
- Power Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With A Molex Connector
- Fans Will Be Operated At The Fixed Molex Voltage Of 12V (Only 2 Pins In Connector Required)
- Cable Is Compatible With Standard 3-Pin Fans As Well
- Quality High Density Black Sleeving For All Black Appearance
- Total Cable Length (Excluding Connectors): 12"/30cm
SaleBestseller No. 6 
ZRM&E LP4 Molex Male to CPU 8(4+4) Pin Male Sleeved Braided Power Adapter 30cm/11.8Inch
- Provide you with a very good DIY cable experience, allowing you to better DIY your own computer.
- The product length is 30cm/11.8in, enough length can bring you a better experience.
- The product is intact and allows you to convert the Molex 4-pin male connector to an EPS-12V 8-pin (4 + 4) male connector.
- Connector 1: LP4 Molex (actual 3 pin) male head - connected to power supply;Connector 2: ATX 4-pin male - connect to motherboard.
- Reminder: This cable is only for the motherboard, not for graphics cards or other devices!
Bestseller No. 7 
ITROLLE 4-Pin Molex to 3-Pin / 4 Pin Fan Power Cable Adapter Connector 2x12V / 2x5V Computer Cooling Fan Splitter Y Power Cables for CPU PC Case Fan
- The cable can add up to 4 fans, two fans for 12V DC and one for 5V DC.
- The fan splitter cable provides additional fans to increase the airflow in the computer case, so that the computer can run better.
- The fan will run on Molex's fixed voltage of 12V (only a 2-pin connector is required). The cable is compatible with standard 3-pin fans.
- Use the 4-pin Molex connector to power four 3-pin or 4-pin (PWM connector) PC case fans.
- Please note that this 4-pin Molex is the actual 2-pin, but it can still work normally on your computer.
Bestseller No. 8 
TeamProfitcom LP4 Molex Male to ATX 4 pin Male Auxiliary Sleeved Braided Power Adapter Cable 12 inches (2 Pack)
- Connector 1: LP4 Molex (actual 3 pin) Male - connects to power supply
- Connector 2: ATX 4 pin Male - connects to motherboard
- Compatible with motherboard ONLY with ATX 4 pin port
- Material: 1007-18AWG, Length including connectors:12 - inches(approx)
- ATTENTION PLEASE : This cable was designed for motherboard ONLY, does not work with graphics cards or other devices !!!
Bestseller No. 9 
COMeap CPU 8 Pin Female to CPU 8 Pin ATX 4 Pin Male Power Supply Converter Adapter Extension Cable for Motherboard 9.5-inch(24cm)
- ăCPU 8P FM - CPU 8P M + ATX 4PăCPU 8 pin female end to plug into the power supply, CPU 8 pin and 4 pin male ends to plug into the motherboard (It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin.);
- ăSolutionăOffering the best solution to get the extra power overclocking required;
- ăCompatibilityăCompatible with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports;(This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.)
- ăParameterăLength(including connectors):9.5-inch(24cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs, Self-adhesive tape*1pcs;
- ăNoteăThis cable is a common power supply Y-splitter extension cable, not converted cable. It only works with motherboard, not GPU. It will be damaged or burned once you plug it into GPU and we wonât take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it;
SaleBestseller No. 10 
StarTech.com 6 Inch 4 Pin to 8 Pin EPS Power Adapter with LP4 - F/M - ATX to EPS Power Adapter (EPS48ADAP), Black
- Connect your non-EPS power supply to an EPS motherboard
- Converts standard P4 and LP4 power supply connection into an 8 pin EPS motherboard connector
- Use a non-EPS power supply with a motherboard that requires an EPS power connection
- Provides 6 inch cable length to reduce cable clutter in the case
Our Best Choice: DAYREE 4-Pin Molex to 5 x 3-Pin / 4-Pin PWM 12V PC Case Fan Power Adapter Cable, 10.6 Inches PWM Fan Connector Computer Cooler Fan Splitter Y Power Cable Compatible with 3-Pin/4-Pin PC Case Fans
Our rating:
(4.7 / 5)
(4.7 / 5)1 to 5 supporter connector lengthen the motherboard 3Pin/4Pin interface
[Product Length]: The overall size is 27 cm / 10.6 inches, and the length of each and every area is about 23CM
[Wire Model]: 1007 26AWG
[Insulation material]: PVC insulation
[Conductor specifications]: 7/.14TS
[Conductor material]: tinned copper
[Outer diameter of wire]: OD 1.3mm
[Rated temperature]: 70â
[Appearance color]: black
[Product weight]: 20 grams
[Product Interface]: A single conclude of the motherboard has a compact 4pin connector, and the other stop has 5 compact 4Pin connectors
[Product function]: Make five lovers share a massive 4Pin interface
Package:
1 x enthusiast connector
Notice:
Due to guide measurement, there might be tiny faults in measurement
Molex to 4 pin fan adapter solves the issue that the CPU plug (3Pin/4Pin) is not adequate, or the motherboard 3Pin/4Pin interface present-day is not sufficient, etc.
Molex-3Pin/4Pin cable splitter is predominantly to lengthen and develop the motherboard 3Pin/4Pin interface
Admirer wire higher-quality black sleeved situation admirer energy source cable, tinned copper conductor, duration approximately 27 cm / 10.6 inches
The Personal computer scenario enthusiast sleeved adapter cable will operate at a fastened Molex voltage of 12V
This 4-Pin Sleeved Braided Y Splitter is the genuine 2-Pin (2 pins are employed for energy offer), but it can still be used generally on your laptop or computer
