Top 10 Best tec cpu cooler in 2021 Comparison Table
- 2nd Generation Pump: Enhanced pump delivers higher liquid flow for exceptional heat removal.
- Thermoelectric Cooling: TEC sensors rapidly cool the water block to combat heat even with the most intense CPU overclocking.
- Intel Cryo Cooling Technology: Balanced combination of hardware, software, and firmware unleash maximum performance for gamers, overclockers, and content creators.
- Software Enabled: Simplified software easily fine-tunes the TEC performance for a customized cooling solution.
- 360 mm Radiator: Enlarged surface area combined with three SF120 fans eliminate heat quickly and efficiently.
- Material: Ceramic. Size: 4 * 4 * 0.36cm/1.57 * 1.57 * 0.14inch(L * W * H).
- Rated voltage: DC12V (Vmax: 15V). Cooling power: Qcmax 72W.
- It gets ice cold in minutes or heat to boiling by simply reversing the polarity.
- It can be used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
- Applies for Small Area Cooling: This Peltier Module is suitable for small space cooling, semiconductor refrigeration learning theory, research solutions developed cooling equipment planning
- Working Principle: Air cooling device, not used to cool the water, use water to dissipate heat, and eventually the water is hot, not cold
- Easy to Operate: This kit is a finished product that does not need to be assembled, Simple operation, cooling quickly, outstanding performance
- Offers Stable Performance: Stable work and low noise, no vibration, no refrigerant required
- Working Range: Suitable for 20L space cooling, air temperature can be cooled to 5-8 degrees than normal
- 3rd Generation Dual Chamber Pump for overall cooling efficiency and performance
- New SickleFlow Refreshed exterior design for improved lighting and fan blades for a quiet airflow performance
- RGB Lighting Signature cooling performance with an RGB design for all of the users wanting lighting effects that are fully customizable
- The larger surface area increased the surface area of the fins on the radiator for better heat dissipation
- Industrial grade seal high: Industrial Grade EPDM material to strengthen the seal for improved longevity and Anti-Leaking
- Direct contact technology: 4 Heat Pipe with exclusive direct contact technology effectively provides excellent heat dissipation; Air flow: 57.3 CFM; Noise level: 26.0 decibels
- Precise air flow: Stacked fin array ensures least airflow resistance which allows cooler air flow into the heat sink
- RGB LED controller: The wired RGB LED controller allows for customizable colors and effects with just the touch of a button
- Smart Fan sensor for jam protection: Never worry about your cables getting snagged or components being mucked up ever again
- Snap and play: Intuitive fan bracket design makes upgrading and removing the fan a breeze
- State-of-the-art dual-tower design with 6 heatpipes and 2 fans provides class-leading cooling performance for overclocking or near-silent systems
- 2 highly optimised NF-A15 140mm fans with PWM support and Low-Noise Adaptors for automatic speed control and ultra-quiet operation
- Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1150, LGA1151, LGA1155, LGA1156, LGA1200, LGA2011, LGA2066 and AMD AM4, AM3(+), AM2(+), FM2(+)
- Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 11900K, 11700K, 10900K, 10980XE) and AMD Ryzen (e.g. 5950X, 5900X, 5800X, 5600X)
- Optional NM-i17xx-MP83 mounting upgrade-kit for Intel’s new, LGA1700 based Alder Lake-S CPUs (12900K, 12700K, 12600K, KF and non-K, etc., Z690 chipset) available separately
- The product is equipped with a 9cm LED silent fan, which kills similar products. The performance improvement brought by the large fan is needless to say, and the blue LED design makes the fan much more stand out.
- Even it‘s an entry-level heat pipe product, the A30 is equipped with a large heat dissipation fin set with a 43x86mm heat dissipation area, making its overall heat dissipation area about 1.5 times that of the same product
- A30 uses the fin scale shape prepared by the Antec air-cooled radiator, which has a more stable shape and able to strengthen the strength and hardness of the scales.
- It equipped with two 6mm high-efficency heat pipes, using 'Fin' to achieve good contact with the fins, so that the heat pipe is quickly transfer into the main body of the heat sink to achieve better cooling
- A30 uses an easy-install bilateral snap-on buckle. This buckle is easily installed on AMD's full range of platforms.it also achieve a non-detachable motherboard on the Intel platform. Installation, making installation easier and faster
- Colorful Cooling Solution: Illuminate your cooler with the darkStorm m2 RGB LED ring. Equipped with a 120mm fan to improve airflow and enhance CPU cooling performance.
- Aesthetic Design: The design of the cowling not only allows air to be compressed but also flow faster on to the CPU for a larger and faster evacuation of hot air.
- Improved Aluminum Fins: With the improved thickness of anodized black aluminum fins, it can dissipates heat away from the CPU efficiently.
- Compatible with: Intel LGA 1200/1366/1156/1155/1151/1150/775; AMD AM4/AM3+/AM2+/AM2/FM2+/FM2. (NOTE: The mounting bracket in package doesn't fit AMD, if you want to install on the AMD motherboard, please use the original mounting bracket of motherboard.)
- Direct contact technology: Direct-touch copper bottom enlarges touching area and provide excellent heat dissipation.
- HiLetgo TEC1-12706 Semiconductor Refrigeration
- RoHS compliant
- Photonic and medical systems
- COOLER THAN OTHER AIO WATER COOLERS: The ARCTIC Liquid Freezer II has a more efficient cool plate, pump and radiator that makes a difference among other AIO water pc fan coolers
- 15°C LOWER VOLTAGE REGULATOR TEMPERATURE: An additional 40 mm VRM fan (PWM controlled) next to pump can provide extra cooling for the base and voltage transformer
- INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fans are integrated into the sleeved tubing. Thus there is only one short cable visible from the pump to motherboard replacing the usual cable mess
- 80% LESS POWER CONSUMPTION: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed
- MAINTENANCE-FREE WATER LOOP: The water loop is sealed and with high quality fiber-reinforce EPDM tubing you do not have to worry about refilling
Our Best Choice: WINOMO 5pcs TEC1-12706 TEC Thermoelectric Cooler Peltier Cooler Heatsink 12V 6A
This amazing thermoelectric cooler get ice cold in minutes or heat to boiling by only reversing the polarity, made use of for many programs from CPU coolers to alternate power resources, or even for your personal custom car consume warmer/cooler.
– Colour: As the picture shown.
– Materials: Ceramic.
– Measurement: 4 * 4 * .36cm/1.57 * 1.57 * .14inch(L * W * H).
– Design: TEC1-12706.
– Rated voltage: DC12V (Vmax: 15V).
– Cooling power: Qcmax 72W.
– Itgets ice chilly in minutes or heat to boiling by just reversing the polarity.
– It can be used for numerous purposes from CPU coolers to alternate electric power resources, or even for your possess custom made car or truck consume hotter/cooler.
Package deal Like
5 * TEC1-12706 TEC Thermoelectric Cooling Generator Thermo Peltier Cooler 12V 6A 40mm x 40mm x 3.6 mm
Is Discontinued By Manufacturer:No
Products Dimensions:1.57 x 1.57 x .14 inches 4.23 Ounces
Day Initial Available:December 16, 2016
Materials: Ceramic. Dimension: 4 * 4 * .36cm/1.57 * 1.57 * .14inch(L * W * H).
Rated voltage: DC12V (Vmax: 15V). Cooling energy: Qcmax 72W.
It gets ice chilly in minutes or heat to boiling by merely reversing the polarity.
It can be applied for numerous purposes from CPU coolers to alternate ability resources, or even for your possess tailor made motor vehicle drink warmer/cooler.