- 1 Top 10 Best tv wall mount wire hide kit in 2021 Comparison Table
- 2 Our Best Choice: Fosmon 1-Gang Wall Plate (2 Pack), Brush Style Opening Passthrough Low Voltage Cable Plate in-Wall Installation for Speaker Wires, Coaxial Cables, HDMI Cables, or Network-Phone Cables
Top 10 Best tv wall mount wire hide kit in 2021 Comparison Table
- Route your power and AV cables behind the wall in 30 minutes or less with this DIY kit. All you need to bring is a drill...and maybe a beer.
- Pre-wired, power-ready system is ETL In-Wall Certified and will keep your house up to code. It'll have you singing "I've Got The Power" like someone threw Jock Jams on.
- Cable pass-through has plenty of space for all your HDMI, Ethernet, and audio cables. It can comfortably fit 4 large braided HDMI cables, but it's flexible enough to handle additional cables.
- Includes a drywall hole saw drill attachment for perfect grommet fit. Locking bracket wings hold onto your wall from behind for a secure install, even if you host raves every weekend.
- Place the power modules up to 5' apart on your wall. If you run into any issues, we’re always here to help any day of the week. We're also helping the planet by planting a tree for every unit sold!
- Hide your cables behind the wall with this DIY cable pass-through kit. Just add a drill and you've got everything you need for a quick 20-minute install. You'll only need to skip 1 episode of The Office.
- Perfect for hiding HDMI, Aux, and other low-voltage cables. Also works for in-wall rated power cables. Just make sure your dog hasn't been chewing on them first.
- Includes a drywall hole saw drill attachment for a perfect grommet fit. The grommets even lock onto the back of your drywall for a secure install. Saw attachment also useful in the event of a zombie apocalypse.
- Flexible pass through grommets can comfortably fit 4 large HDMI cables. There's plenty of room for even your thickest cords.
- Feeling artsy? These grommets are paintable for maximum concealment. Bob Ross would be proud. We're also helping the planet by planting a tree for every unit sold!
- Low profile design fits behind the industry’s thinnest mounts and TVs
- Grounded recessed receptacle allows you to install power behind your wall mounted TV and other similar applications
- Conceal multiple AV cables behind your wall mounted TV
- Mounting wings are molded into the cable pass-through sides of the top plate to fasten against the drywall as you tighten
- Cable pass-through ports on the top and bottom plates allow you to run your low voltage AV cables from your TV through the wall
- Dress Up Your Home and Office; Delamu Cable cover conceal and organize unsightly cords in home and office; It is the easiest way to organize your messy cords and provide more place for activities
- 10 Cable Management Channels; Including 10 pvc channels; each channel L15.7in x W0.95in X H0.55in; 19pcs different connectors; 20pcs screws and 20pcs anchors; 1x self-adhesive; total Length 157 inches
- Simple and Easy Installation; Each package contains screws and anchors; or you can opt to use self-adhesive tape; Both methods are simple; you can choose the one you want; can't be used on textured walls
- Keep Your Child and Pets from Danger; Hiding the cables or cords near the floor; protect your children and pets keep away to play the cables
- Cuttable and Paintable; Customize it to whatever length and color you like; We’ve made the wire channels slim and sleek so as to perfectly blend into your home decor; You can paint the raceway to whatever color you need to match your wall and cut it to any desired length easily
- Dual Outlet In-Wall Cable Management System for Wall Mounted Flat Screen LED, LCD, and Plasma Televisions. This kit includes Two Power Outlets for mounting either two (2) TV's OR one (1) TV and one (1) Audio Visual Accessory Such as a Soundbar.
- No more messy cables hanging down the wall between the TV and the floor. No electrician needed with snap together Power Connectors.
- This system allows for Wall Mounted TV's to hide low-voltage cables and wires routed behind the wall for a clean look.
- The Included In-Wall PowerConnect Cable and 6-foot Power Cord is code compliant. Does not include HDMI Cables or other Low Voltage Audio Visual Cables.
- Included Recessed wall mount plates are hidden behind Flat Screen TV Mount and should work with the thinnest TV mounts and thinnest TV's on the market.
- 4 Sections Packing: each section is 9 inch lenght, 4pcs intotal will be 36 inch. Install end to end, rarely need hacksaw to cut, you will get the length you need.
- Clean the Look of Your TV Wall: don't let those unsightly wires hanging there, concealing with our cord cover, your room will looks ever neat.
- Hide Away Cables, Keep Dangerous Away: you will never want to see your lovely toddler or pets play with the cables, this wire hider will be a smart choice.
- Tools Free Installation: with adhesive tape already on the raceway, the wall cord cover is easy to install; And the special snap-on cover design for easy adding or removing cables.
- Paintable Surface: hardly noticed stripes on the surface, our cable cover can be painted to match your wall.
- When running cables in the wall isn't an option, Baskiss cable covers are the perfect way to hide cables that can't be routed in the wall. Perfect for wall mounted TVs, wired surround sound systems or computer desks-anywhere cables are visible along a wall.
- Comes with a set of 6 white cable covers . Each cover measures 11.8" and conceals up to 5 cables for cleaner aesthetics and improved safety. Install 6 covers together you get a cable management cover up to 70.8".
- It protect kids and pets from directly touching or messing the power cables and meanwhile reclaim lost floor and desk space with a simple solution for cable and cord management.
- Mark the cord cover. Using the base, mark locations for wall anchors (included) and fasten cord cover base to the wall with the included screws.
- White color fits seamlessly and perfect for home or office use. You can also paint cover with latex wall paint to blend with wall color.
- FLEXIBILE INSTALLATION: Gives you the freedom and flexibility to install any TV, anywhere in your home
- HIDES CABLES: Neatly conceal power, HDMI, coax and Cat5e behind the wall for a clean, uniform and expandable home solution
- UNIVERSAL COMPATIBILITY: Works with all TV brands CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications
- CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications. Total Outlet: 2
- KIT INCLUDES: Power Output Module (includes 6 ft. pre-wired cord), Power Input Module, Drywall Bracket, 6ft Power Cord, and cut-out Template with complete instruction guide
- DIY in-wall power kit hides all of your cables to power and connect your components for the ultimate soundbar and wall mount cable management solution. Included pre-wired in-wall rated power cables have been safety tested and meet national code requirements
- Dual outlet design allows you to power both a TV and a small component or media device: Apple TV, Roku, etc... in upper module behind wall mounted TV. In wall cable pass through design easily handles 4 large HDMI cables with room for more low-voltage cables.
- All inclusive! We include everything you need in this flat panel tv cable organizer kit: dry-wall saw, cutting templates, hardware, 3 power modules, 6' extension cord, and power cables to connect wall modules.
- For a streamlined look, we include covers for each module that are paintable to blend in effortlessly with your homes decor. The soundbar module features a short and slim profile to provide discreet soundbar cable management.
- Easy 30-minute installation, no power tools required! You just need a few basic household tools and a drywall saw, which we include in the box. Use the included templates to cut holes, insert wall modules, and use a screwdriver to tighten the modules securely to the drywall.
- No one should have to go through this. The wall, that is. This 100% American-made, on-wall TV cord cover is a great-looking, easy alternative to in-wall cable management.
- Know how to use a Phillips screwdriver? Sweet. Then you can also install this cord organizer. And in less than 15 minutes.
- Snap out of it! Cord cover easily snaps on or off to add or adjust contents at any time. Plus they are paintable to blend in.
- Cable channel is 48" long, but can be cut down to any size to fit your setup. At 3.5" wide and 3/4" high, you can comfrotably fit 6-8 cables in the channel.
- Our ECHOGEAR Pros are here to help 7 days a week. Go to our website or check your product manual for all the different ways to get in touch with our real-life product know-it-alls.
Our Best Choice: Fosmon 1-Gang Wall Plate (2 Pack), Brush Style Opening Passthrough Low Voltage Cable Plate in-Wall Installation for Speaker Wires, Coaxial Cables, HDMI Cables, or Network-Phone Cables
Brush Wall Plate Has a Universal Design
Fosmon’s universal brush wall plate is designed specifically for the installation of low-voltage cables and wires in walls. The design accommodates the space needed for speaker wires, coaxial, HDMI and data/communication cables. It runs cables neatly through walls, providing a professional look with a fraction of the cost
Mounts Flush to the Wall
The brush wall plate mounts flush to standard sized single wall plate brackets and gang boxes.
Its standard sizing and screw pattern makes installation a breeze. Simply unscrew wall cover from brush plate, and using the 2 screws, screw into any standard box or gang plate.
Keep Your Wires Clean and Out of Site
Fosmon brush wall plates eliminate the clutter of wiring along your baseboards and up your walls. Using the brush wall plate results in a clean and tidy organization of your A/V wires.
For low voltage devices only Mounts to standard size gang boxes and wall plate brackets
Use a straight edge to make sure the mounting bracket is level.
Carefully cut a hole in the drywall.
Install and tighten the mounting screws.
Run the cables cleanly and neatly through the brush wall plate.
Brush plate dimensions:
Wall cover dimensions:
2x Fosmon universal brush wall plate
8x Mounting screws
5 Pack Wall Plate / 5 Pack Mounting Bracket
1 Pack[PERFECT FOR FLAT PANEL TVS, SURROUND SOUND, AND OTHE LOW VOLTAGE A/V DEVICES] With the brush wall plate take those unsightly A/V wires from your TV, video game console, surround sound system or other low voltage devices and put them neatly out of sight.
[MOUNTS FLUSH TO WALL] The brush wall plate sits flat to wall and mounts to any standard single bracket or gang box.
[EASY INSTALLATION] Simply unscrew wall cover from brush plate, and using the 2 screws, screw into any standard box or gang plate.
[LIMITED LIFETIME WARRANTY] Join millions of satisfied customers with our limited lifetime warranty, backed by our experienced and dedicated USA based customer service.